The Hayes Dominion A4 master cylinder is engineeredĀ to achieve the shortest possible dead stroke and a sharp, responsive bite point right out of the factory. The Dominion A4 caliper features a four-piston design, optimized for maximum structural rigidity. This is achieved through a cold-forged caliper and the inclusion of a KingPin structural pad retention bolt, which significantly enhances stiffness.
Inspired by motorsports, the Two-Stroke dual port bleed system, combined with top-tier DOT 5.1 fluid and a Kevlar-reinforced hose, ensures the hydraulic system delivers peak performance under all temperature conditions and simplifies maintenance. This setup ensures reliability and top-level performance, making it a prime choice for demanding hydraulic needs.
________
Features:Ā
- Dominion A4 features the proprietary QuickBiteĀ² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise.
- Tool-Free Reach Adjustment
- Flip-Flop Lever Orientation
- King Pin Pad Retention
- Crosshair Caliper Alignment
- Two-Stroke Dual-port bleed system
________
Specifications:Ā
| 303g (100cm hose and mount hardware) |
| DOT 5.1 Fluid |
| Tool-Free Reach Adjustment |
| 2-Stroke Dual Port Bleed System |
| Sealed Cartridge Bearings Lever Pivot |
| 100cm Front Hose Length |
| 180cm Rear Hose Length |
- Recommended brake rotor: Hayes D-Series (not included!)
________
Each complete brake set includes:Ā
- 2 Dominion A4 levers
- 2Ā Dominion A4 callipers with pads
- 4 Fastening screws
- 2 barbs
- 2 olives
- Disc brakes are ready-to-install, filled and bled!
Dominion A4 brake levers are ambidextrous (flippable) and can be mounted on either the left or right side. The only differance between the front and rear configurations is the length of the brake hose: the rear lever uses a longer 1800mm hose, while the front lever comes with a 1000mm hose. Options labeled "front or rear" come equipped with the longer 1800mm hose, offering flexibility depending on your setup needs.